- Spray Booths[6]
- Lubricants[6]
- Other Car Care Products[6]
- Body Repair Equipment[6]
- Car Lifts[6]
- Other Vehicle Equipment[2]
- Tire Changers[6]
- Wheel Alignment[6]
- Diagnostic Tools[6]
- Other Vehicle Tools[1]
- Tire Inflators[6]
- Transmission Jacks[6]
- Lathe[1]
- Hoists[3]
- Metal Straightening Machinery[2]
- Other Machinery[6]
- Welding Torches[6]
- Current Meters[1]
- Vernier Calipers[2]
- Other Store & Supermarket Equipment[6]
- Hydraulic Tools[4]
- Contact Person : Ms. Lu Karol
- Company Name : Kaip (Shanghai) Machinery Co., Ltd.
- Tel : 86-21-52681560
- Fax : 86-21-52681560
- Address : Shanghai,Shanghai,North Zhongshan Rd, Putuo district
- Country/Region : China
- Zip : 200062
KC-G7 SPRAY BOOTH
Related Product Searches:KC-G7 SPRAY BOOTH,High Quality,SPRAY BOOTH, exhaust fan spray booth,KC-G7
KC-G7 SPRAY BOOTH
water soluble spray booth
Environment-protection paint (water soluble paint) in the auto maintance industry becomes a trend
Features:
1. KC-SG7 suitable for water-based paint and traditional automobile repair work
2. 1unit hot-air generator and 4unit independent heating-wind acceleration system. these systems used at the same time, but only hot-air genenrator used for genenral paint
3. The air nozzle be at the sides of the spray booth in 45° angle, make sure the average speed. angle be adjustable, make the hot air concentrate on the surface of the automobile and shorten the period of paint solidification
4. Imported filter cotton and Italy burner
5. Imported electrical control box with protection device of overheat, overload and short-circuit.The temperature diffence between outside and inside can be moderated by pressure thermometer;
6. Main system adopt 3 throttle structure, both the inlet and exhaust air capacity can be adjustable
Specifications:
Configuration | Specification | Optional | ||
Body | Panel | Sandwich style, δ=50mm, polystyrene | Rock wool | |
Basement | Full grids |
| ||
Ramp | 2pcs of vein board |
| ||
Emergency door | 1pc of emergency door with pressure lock |
| ||
Front door | 3pcs of front door, without Aluminum side cover |
| ||
Air system | Frame | Steel, powder coated |
| |
Intake fan | 11Kw |
| ||
Exhaust fan | 11Kw |
| ||
Intake duct | 4m staight intake ducts, one 90° bend, and one 60° bend |
| ||
Exhaust duct | 4m staight exhaust ducts, one 90° bend, one 60° bend |
| ||
Intake damper | 1 manual VCD | Electrical VCD | ||
Exhaust damper | 1 manual VCD | Electrical VCD | ||
Chimney duct | 5m staight chimney ducts, and 2 small bends |
| ||
Spraying / bakingTransition damper | Automatically air controlled |
| ||
Burner | RIELLO /RG5S |
| ||
Heat exchanger | Stainless steel, circular heating, chimney at back |
| ||
Water painting compliant | 4sets of 0.8Kw fan, 40pcs of stainless steel nozzles |
| ||
Filtrationsystem | Roof filter | 6pcs of filter, moounted above support framemade of steel and power coated |
| |
Floor filter | 5pcs |
| ||
Air mouth filter | 2pc, M style, both before intake and exhaust fan | Bag style | ||
Lightsystem | Upper light | 10sets, 4x40w per set |
| |
Side light | 8 sets, 2x40w per set |
| ||
Electricsystem | Control panel | Imported components, Motor startoverload,overheat,phase-lacking protection |
| |
Pressure meter | 1pc |
| ||
Automatically stop | Automatically stop when preset time is up |
| ||
Constant temperature spraying | Yes |
| ||
Environmental filter | No |
| ||
Dimensions:
| Model No. | External size(m) | Internal size(m) | Door width(m) | Door height(m) | Air flow(m3/h) | On-load air speed(m/s) | Power(Kw) | Vehicle | |||
| KC-G7 | 7.0x5.6x4.0 | 6.9x3.9x2.7 | 3.0 | 2.66 | 30,000 | 0.3-0.5 | 26 | Sallon car | |||
KC-G7 SPRAY BOOTH
